D-Link DWS-4000 Series Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 566

D-Link DWS-4000 Series Скачать руководство пользователя страница 106

D-Link Unified Switch CLI Command Reference

98

© 2009 D-Link Corporation. All Rights Reserved

no macfilter addsrc all

This command removes all interfaces to the source filter set for the MAC filter with the MAC address of

<macaddr>

and

VLAN of

<vlanid>

. You must specify the

<macaddr>

parameter as a 6-byte hexadecimal number in the format of

b1:b2:b3:b4:b5:b6.

The

<vlanid>

parameter must identify a valid VLAN.

show mac-address-table static

This command displays the Static MAC Filtering information for all Static MAC Filters. If you select

<all>

, all the Static MAC

Filters in the system are displayed. If you supply a value for

<macaddr>,

you must also enter a value for

<vlanid>

, and

the system displays Static MAC Filter information only for that MAC address and VLAN.

show mac-address-table staticfiltering

This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table.

Format

no macfilter addsrc all

<macaddr> <vlanid>

Mode

Global Config

Format

show mac-address-table static

{<macaddr> <vlanid> | all}

Mode

Privileged EXEC

Term

Definition

MAC Address

The MAC Address of the static MAC filter entry.

VLAN ID

The VLAN ID of the static MAC filter entry.

Source Port(s)

The source port filter set's slot and port(s).

Note:

Only multicast address filters will have destination port lists.

Format

show mac-address-table staticfiltering

Mode

Privileged EXEC

Term

Definition

Mac Address

A unicast MAC address for which the switch has forwarding and or filtering information. As the data is
gleaned from the MFDB, the address will be a multicast address. The format is 6 or 8 two-digit
hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system
the MAC address will be displayed as 8 bytes.

Type

The type of the entry. Static entries are those that are configured by the end user. Dynamic entries are
added to the table as a result of a learning process or protocol.

Description

The text description of this multicast table entry.

Interfaces

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

«
...
104
105
106
107
108
...
»

Содержание DWS-4000 Series























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов