D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 271 / 566

263
Access Point Profile Commands
Example: The following shows an example of the command.
DWS-4026 (Config-ap-profile)# vlan 10 ?
<cr> Press Enter to execute the command.
no vlan (AP Profile Config Mode)
This command allows you to set the wired network detection VLAN ID to the default value. “1”.
Example:
The following shows an example of the command.
DWS-4026 (Config-ap-profile)# no vlan
<cr> Press Enter to execute the command.
ap profile copy
This command copies an entire existing AP profile to another profile. If the destination profile does not exist, it will be created.
Example:
The following shows an example of the command.
If the destination AP Profile is associated with Managed APs:
DWS-4026 (Config-wireless)# ap profile copy 1 2 <cr>
The destination profile is associated with WS Managed APs. Do you want to overwrite the
existing profile (y/n)? <enter ‘y’ or ‘n’>
wireless ap profile apply
This command requests for the switch to resend the AP profile configuration to all managed APs associated with the profile.
This allows you to apply configuration changes to the APs that are already managed.
Format
no vlan
Mode AP Profile Config
Format
ap profile copy <1-16> <1-16>
Mode Wireless Config
Parameter Description
1-16 Source AP Profile ID.
1-16 Destination AP Profile ID.
Format
wireless ap profile apply <1-16>
Mode Privileged EXEC
Parameter Description
1-16 AP Profile ID.