D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 272 / 566

D-Link Unified Switch CLI Command Reference
264
© 2009 D-Link Corporation. All Rights Reserved
Example: The following shows an example of the command.
If the profile is associated with WS Managed APs:
DWS-4026 (Config-wireless)# ap profile apply 1 <cr>
Do you want to apply the configuration to all managed APs associated with this profile?
(y/n)
clear (AP Profile Config Mode)
This command restores an AP profile configuration to default values except for the profile name. The profile name is not an
AP configuration and is only used for descriptive purposes, therefore it is not cleared with this command. To delete a profile
name, use the
no name command.
Example: The following shows an example of the command.
DWS-4026 (Config-ap-profile)# clear
All configurations will be set to the default values for this profile except the
profile name. Are you sure you want to clear the profile configuration? (y/n)y
show wireless ap profile
This command displays the configured AP profiles. If you do not enter any command parameters, a summary of all AP
profiles is displayed. You can enter an AP profile ID to display detailed configuration for a specific profile.
Example:
The following shows example CLI display output for the command.
(DWS-4026) #show wireless ap profile 1
AP Profile ID.................................. 1
Profile Name................................... Default
Format
clear
Mode AP Profile Config
Format
show wireless ap profile [<1-16> [radio [<1-2>]]]
Mode Privileged EXEC
Field Description
AP Profile ID Existing AP profile ID.
Profile Name A descriptive name for the corresponding AP profile ID.
Hardware Type Existing AP hardware type ID and description string.
Wired Network
Detection VLAN ID The VLAND ID used for sending tracer packets by the wired network detection algorithm. A configured
value of 0 results in the transmission of untagged tracer packets.
Profile Status Indicates the current AP profile status:
• Configured —the profile exists, no managed APs are configured with the profile.
• Associated —one or more managed APs are configured with the profile.
• Apply Requested —you have invoked the
apply
command for the profile.
• Apply In Progress —the profile is currently being applied to the associated managed APs. When
the apply is complete, the profile returns to Associated status.