85
Port:
The number of the port.
Media Type:
The media type of the port, either Copper (TX) or Fiber (FX).
Port State:
This shows each port’s state which can be
D
(Disabled) or
E
(Enabled).
Disabled:
A port in this state cannot receive and forward packets.
Enabled:
Packets can be forwarded.
Link State
: The current link status of the port, either up or down.
Speed (Mbps):
The current operation speed of each port.
Duplex:
The current operation Duplex mode of each port, either Full or Half.
Flow Control:
This shows the status of Flow Control function, either on or off.
Description:
This shows the description of this port described in “Port Configuration”.
3.5.2 Port Counters Rates
The rate mode of port counters will be re-calculated when that counter is reset or cleared. Click
Port
counters Rates
folder and then three options appear.
1.
Port Traffic Statistics (Rates):
View the number of bytes received, frames received, bytes sent,
frames sent, and total bytes.
2.
Port Packet Error Statistics (Rates):
View the number of CRC errors, undersize frames, oversize
frames…etc.
3.
Port Packet analysis Statistics (Rates):
View each port’s analysis history.
3.5.2.1 Port Traffic Statistics (Rates)
The following screen page appears if you choose
Port Counters Rates
and then select
Port Traffic
Statistics (Rates)
.
