39
ICPE(config)# syslog
ICPE(config)# syslog server1 192.168.0.222
Enable syslog and assign server1 IP address
192.168.0.222
2.5.16 USB Command
USB command
Parameter
Description
ICPE(config)# usb [usb_list]
[usb_list]
Enable specified usb ports
No Command
ICPE(config)# no usb [usb_list]
Disable specified usb ports.
Show Command
ICPE(config)# show usb
Display USB status
2.5.17 User Command
1. Create a new login account.
User command
Parameter
Description
ICPE(config)# user name
[user_name]
[user_name]
Enter the new account’s username. The
authorized user login name is up to 20
alphanumeric characters. Only 3 login accounts
can be registered in this device.
ICPE(config-user-
USERNAME)# active
Activate this user account.
ICPE(config-user-
USERNAME)# description
[description]
[description]
Enter the brief description for this user account.
ICPE(config-user-
USERNAME)# level [admin |
rw | ro]
[admin | rw | ro]
Specify user account level. By default, when you
create a community, the access privilege for this
account is set to “read only”.
Admin:
Full access right, including maintaining
user account, system information, loading factory
settings, etc..
rw:
Read & Write access privilege. Partial access
right, unable to modify system information, user
account, load factory settings and upgrade
firmware.
Ro:
Read Only access privilege.
ICPE(config-user-
USERNAME)# password
[password]
[password]
Enter the password for this user account up to 20
alphanumeric characters.
No command
ICPE(config)# no user name
[user_name]
[user_name]
Delete the specified user account.
