58
Read & Write:
Partial access right, unable to modify system information, user account, load
factory settings and upgrade firmware.
Read Only:
Read only access right.
NOTE:
If you forget the login password, the only way to gain access to the Web Management is to set the
Gateway Controller
back to the factory default setting by pressing the Reset button for more than10 seconds
(The Reset button is located on the Upper Panel of the
Gateway Controller
.). When the
Gateway Controller
returns back to the default setting, you can login with the default login username and password (By default, no
password is required. Leave the field empty and then press Login.)
Click the
“OK”
button to apply the settings.
RADIUS Configuration
Click
RADIUS Configuration
in
User Authentication
and then the following screen page appears.
When
RADIUS Authentication
is enabled, User login will be according to those settings on the
RADIUS server(s).
NOTE:
For advanced RADIUS Server setup, please refer to APPENDIX B or the “free RADIUS
readme.txt” file on the disc provided with this product.
Secret Key:
The word to encrypt data of being sent to RADIUS server.
RADIUS Port:
The RADIUS service port on RADIUS server.
Retry Time:
Times of trying to reconnect if the RADISU server is not reachable.
