Use and Maintenance Manual – 08/2018 Rel. 3
Page 4
If the machine is not packed, observe following precautions:
PROTECT THE SHARP EDGES AT THE ENDS WITH SUITABLE MATERIAL (Bubble wrap or cardboard).
DO NOT USE METAL WIRE ROPES FOR LIFTING BOARD.
SLING WITH STRAPS OF AT LEAST 200 cm IN LENGTH AND WITH A HIGHER FLOW RATE OF 3000 kg.
DO NOT FORCE ON SHAFT AND/OR FLANGE (See figures F4.1 and F4.2).
Figure F4.1
Figure F4.2
ALWAYS UNPLUG THE POWER SUPPLY CABLE FROM THE SOCKET BEFORE MOVING THE MACHINE.
The environmental working conditions must comply with the following requirements:
-
Temperature from 0° C to + 45° C
-
Relative humidity from 20% to 95%
5. UNPACKING
After removing packing, check integrity of machine making sure there are no visibly damaged parts.
In case of doubt DO NOT USE THE MACHINE and consult qualified personnel (dealer or manufacturer). The packaging materials
(plastic bags, nails, screws pieces of wood, etc.) must not be left within reach of children as they are potential sources of danger.
Packaging materials should be stored in the appropriate collection points if non-biodegradable pollutants.
CHECK THE PRESENCE OF THE BOX CONTAINING THE ACCESSORIES TO AVOID THROWING IT WITH
PACKING.
NO
NO
