Use and Maintenance Manual – 08/2018 Rel. 3
Page 39
040
Only on MEC 810 VD,
is activated automatically
(highlighted in blue). The blue band next to the icon will
flash until the value is entered.
050
Manually introduce the rim width
. The width of the rim is normally printed on the rim itself. Alternatively use the
appropriate width measuring gauge.
Turn the wheel by hand to enter the detected value until you achieve the required value on the wheel
dimension data band
or enter the detected value by pressing [P2] or [P4]
on the keyboard.
060
Activate the STANDARD program by selecting the icon
(by default at power on)
which will be outlined in blue.
Press
on the keyboard
to
confirm.
070
Press [P1] or [P3]
on the keyboard
to select the icon relative to the required program which will be
outlined in blue.
