Use and Maintenance Manual – 08/2018 Rel. 3
Page 45
040
Wait to hear the long acquisition beep and then set the sensor
back to the rest position.
The machine automatically
starts the ALS2 program.
050
The wheel dimensions have been acquired and the values can
be displayed on the wheel dimensions data band.
060
ALS1 PROGRAM ACTIVATION
Check that the required program icon is selected; then press
on the keyboard
to
confirm.
070
Press [P1] or [P3]
on the keyboard
to select the icon relative to the
required program
which will be outlined in blue.
080
Press
on the keyboard
to
confirm and to activate the required balancing program.
