Use and Maintenance Manual – 08/2018 Rel. 3
Page 56
20. SECOND OPERATOR
The machine has two separate memories allowing two operators to work simultaneously with different settings. This feature can
make operations at the workshop quicker because when, for example, an operator is busy with removing or remounting a tyre, the
other operator can use the machine to perform balancing operations and vice versa. In this manual, the two operators are defined
as
operator 1
and
operator 2
. When operator 1 has completed his tasks on the machine or is involved in other activities, operator 2
can work with the machine using the settings for the wheel type he is working on without altering the settings entered by operator
1. When the machine is switched on, the two memories are set with the same values by default.
To select the TWO OPERATORS program, proceed as described below:
Phase
Description
010
Press [P1] or [P3]
on keyboard
and
select the icon relative to the program to be used.
020
Activate the program for nr. 1 OPERATOR by selecting
(by default at power on) which will turn blue.
030
Scroll through the list of available programs by pressing [P2] or [P4]
on the keyboard
040
Activate the program for nr. 2 OPERATORS by selecting
.
