Use and Maintenance Manual – 08/2018 Rel. 3
Page 37
060
Press
on the keyboard
to confirm
and to activate the required balancing program.
070
Based on the selected Program Type, will be displayed the
Program Type status icon and the position of the imbalance
weights.
17.3.1.2 Machine without Width sensor (MEC 810VD)
To acquire wheel dimensions, proceed as described below:
Phase
Description
010
Fit the wheel on the shaft and tighten with the ring nut.
020
Extract the distance/diameter sensor and place it on the rim as
shown here.
When the distance/diameter sensor come back in rest position it
is automatically activated the STANDARD program
.
030
Wait to hear the long acquisition beep and then set the
Distance/Diameter sensor back to the rest position. During
acquisition the distance and diameter values are displayed on the
wheel dimension data band.
