Use and Maintenance Manual – 08/2018 Rel. 3
Page 49
040
The laser pointer will identify the weight application positions on
both internal and external (for ALS2) or only external (for ALS1)
imbalance points.
The weights must always be
applied at 6 o’clock.
050
Lower the wheel guard to perform a balancing spin. At the end of
the spin the unbalance data will be displayed. The laser line
indicates the position where to apply the external weight at 6
o’clock while the internal weight must be applied at 12 o’clock.
The weights must be applied at 6 o’clock (on the laser line)
external side, and at 12 o’clock internal side. To activate ALS1
program see page 45, paragraph 60.
18. OPTIMIZATION
The optimization program is used to minimize the amount of balancing weights to be applied on the rim by opposing the imbalance
of the rim to that of the tyre. Therefore, use this program when the wheel requires the application of heavy balancing weights.
To access the OPTIMIZATION program, proceed as described below:
Phase
Description
010
Lower the wheel guard: the machine will run a launch.
020
Press [P1] or [P3]
on keyboard
and
select icon relative to the program to be used.
030
Activate the OPTIMIZATION program by selecting
(which
will be outlined in blue) and confirm by pressing [P6]
on
the keyboard.
