Use and Maintenance Manual – 08/2018 Rel. 3
Page 60
040
Activate the BRAKE DISABLING program by selecting
.
The electromagnetic clamping brake is deactivated automatically in the following cases:
•
Every time a balancing launch is run;
•
Every time a SWI procedure is performed (stop of the wheel on the imbalance position) at low speed;
•
After one minute of continuous activation (to avoid overheating of the brake itself).
The electromagnetic clamping brake can be used manually only in NORMAL mode. It cannot be used in the SERVICE mode.
21.4 Illuminator (only on MEC 820VD)
The illuminator is particularly useful as it lights up the inner part of the rim.
To activate and/or deactivate the ILLUMINATOR, proceed as described below:
Phase
Description
010
Press [P1] or [P3]
on the keyboard
and select the icon relative to the program to be used.
020
Activate the ILLUMINATOR ENABLING program by selecting
(by default at power on only for MEC 820VD) which will
turn blue.
030
Scroll through the list of available programs by pressing [P2] or [P4]
on the keyboard