Use and Maintenance Manual – 08/2018 Rel. 3
Page 2
Machine dimensions
Figure F1.1
1. INTRODUCTION
This manual is an integral part of the machine and it must to stay with wheel balancer until the scrapping of the machine.
Read carefully each section of this manual before using the machine. The manufacturer is not responsible for damage and/or injury
caused by failure to follow the instructions of this manual.
We also recommend:
•
Keep the manual near wheel balancer for easy access;
•
Keep the manual in a place protected from dirt;
•
Do not damage the manual.
In the manual the following symbols are represented:
Indicates operations that require special attention
Indicates prohibitions
Indicates possible danger for the operator
The MANUFACTURER We reserve the right to make any change to products in order to improve them.
The MANUFACTURER We reserve the right to make any change to this manual without notice.
1.1 Terms of Warrantee and limitations of responsibility
The information in the present manual have been released with the maximum attention, and nothing
reported may modify the terms and the general conditions of the contracts of purchase, of leasing or of
rental, in which the equipment mentioned in this manual had been acquired, neither it increases in some
way the responsibility towards the customer or of bystanders.
FOR THE READER
The machine remains a working aid to the operator’s activity.
Basing on the evaluations coming both from the unit and his visual control of the wheel, supported by his
experience, the operator remains the one deciding what to do and responsible of the final actions on the
wheels.
MEC 810VD – 1170
MEC 820VD – 1180
MEC 810VD – 880
MEC 820VD – 880
MEC 810VD – 860
MEC 820VD – 900
M
EC
8
10
VD
–
1
40
0
M
EC
8
20
VD
–
1
40
0
M
EC
8
10
VD
–
1
23
0
M
EC
8
20
VD
–
1
23
0
