Use and Maintenance Manual – 08/2018 Rel. 3
Page 27
Apply the weights displayed by the machine at the indicated positions and then run a second test spin. Normally, the weights should
be applied at the 12 o’clock with the exception of special programs for ALS1 and ALS2 aluminum.
The machine allows the choice between eight different Program Type of balancing as listed in table T17.1.
Table T17.1: Program types available
Program Type Wheel
material
Weight position along the rim
selection
Automatic
acquisition
(1)
Notes
STD
Steel
Default
2 sensors
Default at power on
ALU1
Aluminum
Default
2 sensors
Forcibly set when the Motorbike
Program Type is selected
ALU2
Aluminum
Default
2 sensors
ALU3
Aluminum
Default
2 sensors
ALU4
Aluminum
Default
2 sensors
ALU5
Aluminum
Default
2 sensors
ALS1
Aluminum
Default inner weight, outer
weight provided by user
1 sensor
ALS2
Aluminum
Provided by user
1 sensor
(1)
Available on some models.
17.1 Program Type Selection (Program Type)
The programs can be selected in NORMAL mode as described below:
Phase
Description
010
Press [P1] or [P3]
on keyboard
and
select the icon relative to the program to be used.
020
Activate the STANDARD program by selecting the icon
(by default at power on)
which will be outlined in blue.
Press
on the keyboard
to
confirm.
