Use and Maintenance Manual – 08/2018 Rel. 3
Page 11
9. ENVIRONMENTAL INFORMATION
THE DISPOSAL PROCEDURE DESCRIBED BELOW ONLY APPLIES TO MACHINES WITH
THE SYMBOL OF THE CROSSED-OUT WHEELIE BIN ON THEIR DATA PLATES.
The crossed-out wheelie bin symbol, placed on the product and on this page, reminds the user that the product must be disposed of
properly at the end of its life. This product may contain substances that can be hazardous to the environment and to human health
if it is not disposed of properly. We are therefore providing you with the information below in order to prevent these substances
from being released into the environment and to improve the use of natural resources. Electrical and electronic equipment must
never be disposed of in the usual municipal waste but must be separately collected for their proper treatment. Thus, the hazardous
consequences that non-specific treatments of the substances contained in these products, or improper use of parts of them, may
have on the environment or on human health are prevented. Furthermore, this helps to recover, recycle and reuse many of the
materials contained in these products. Electrical and electronic manufacturers and distributors set up proper collection and
treatment systems for these products for this purpose. At the end of the product’s working life contact your supplier for information
about disposal procedures. When you purchase this product, your supplier will also inform you that you may return another worn-
out appliance to him free of charge, provided it is of the same type and has provided the same functions as the product just purchased.
Any disposal of the product performed in a different way from that described above will be liable to the penalties provided for by the
nation regulations in force in the country where the product is disposed of. We also ask you to adopt other environmentally-friendly
measures: recycle the internal and external packaging that the product comes in and suitably dispose of used batteries (only if
contained in the product). Your help is critical to reduce the amount of natural resources used for manufacturing electrical and
electronic equipment, minimize the use of landfills for product disposal and improve the quality of life, preventing potentially
hazardous substances from being released in the environment.
10. TECHNICAL DATA
General features
Power supply voltage
(1)
1Ph 230 V 50/60 Hz
1Ph 110 V 50/60 Hz
Motor voltage
1Ph 230 V 50/60 Hz
Specify different voltages (for ex. 110 V)
Power consumption
100 W
Balancing speed
140 RPM
Maximum displayed unbalance value
999 g.
Working resolution
X1 (1 g. or 0.1 once)
X5 (5 g. or 0.25 once)
Shaft diameter
40 mm.
Working environment temperature
from 0° to +45 °C
Storage temperature
from -10° to +60 °C
Storage relative humidity
20% ÷ 95% without condensation
Machine weight (without accessories)
130 kg. (MEC 810VD)
170 kg. (MEC 820VD)
Noise level
< 70 dB(A)
(1) The motor voltage must be specified at the order.
