Use and Maintenance Manual – 08/2018 Rel. 3
Page 38
040
Only on MEC 810 VD,
is activated automatically
(highlighted in blue). The blue band next to the icon will
flash until the value is entered.
050
Manually introduce the rim width
. The width of the rim is normally printed on the rim itself. Alternatively use the
appropriate width measuring gauge.
Turn the wheel by hand to enter the detected value until you achieve the required value on the wheel
dimension data band
or enter the detected value by pressing [P2] or [P4]
on the keyboard.
ALU1, 2, 3, 4, 5 Program Type selection
Phase
Description
010
Fit the wheel on the shaft and tighten with the ring nut.
020
Extract the distance/diameter sensor and place it on the rim as
shown here.
When the distance/diameter sensor come back in rest position it
is automatically activated the STANDARD program
.
030
Wait to hear the long acquisition beep and then set the
Distance/Diameter sensor back to the rest position. During
acquisition the distance and diameter values are displayed on the
wheel dimension data band.
