Use and Maintenance Manual – 08/2018 Rel. 3
Page 36
020
Only for programs STD, ALU1, ALU2, ALU3, ALU 4, ALU5; Take out
first the width sensor and THEN the distance/diameter sensor and
place them on the rim, as shown here.
When the both sensors come back in rest position, it is
automatically activated the STANDARD program.
030
Wait to hear the long acquisition beep and then set the sensors
back to the rest position. During acquisition the distance and
diameter values are displayed on the wheel dimension data band.
040
Activate the STANDARD program by selecting the icon
(by default at power on)
which will be outlined in blue.
Press
on the keyboard
to
confirm.
050
Press [P1] or [P3]
on the keyboard
to select the icon relative to the required program which will be
outlined in blue.
