![background image](http://html1.mh-extra.com/html/compaq/proliant-5000/proliant-5000_reference-manual_2645138159.webp)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-25
Compaq ProLiant 5000 Servers Reference Guide
Writer: Project: Server Management Comments:
File Name: N-ch10.doc Last Saved On: 4/23/96 11:31 AM
Booting into the Operating System
When you enable ASR-2 to restart into the operating system and a critical
error occurs, ASR-2 logs the error in the Critical Error Log and restarts the
server. The system ROM pages the designated administrator, and executes the
normal restart process.
IMPORTANT:
When you enable ASR-2 to restart into the operating system, Modem Dial-
In Status, Network Status, and Modem Dial-Out Status are automatically disabled. In this
mode, ASR-2 can page you in the event of a critical error, but you cannot access the server,
and the server cannot dial out to a remote workstation.
During the recovery process, the ASR-2 feature tries to restart the server up to
10 times. If the ASR-2 feature cannot restart the server within the 10 attempts,
it logs a critical error in the Critical Error Log, restarts the server into the
Compaq Utilities, and puts the modem into auto-answer mode. If the server
cannot restart into the Compaq Utilities, then ROM-based diagnostics are
automatically invoked.
Your System Configuration Utility setting should resemble the following
when you enable ASR to restart into the operating system:
Serial interface
COM1
Dial-in status
Disabled
Dial-out status
Disabled
Dial-out string
555-1234
Network status
Disabled
Network protocol
IPX
Network controller
Compaq
Network host name
CPQHOU
Network card slot
Slot #
Network frame type
ETHERNET_II