. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11-34
Diagnostic Tools
Writer: Project: Diagnostic Tools Comments:
File Name: O-ch11.doc Last Saved On: 4/22/97 1:11 PM
Test
Test is a utility that determines if the various computer components installed
are recognized by the system and functioning properly. Running Test
Computer is optional, but advisable, after installing or connecting a new
device.
You can display, print, or save the information. Your Authorized Compaq
Reseller or Service Provider may ask you to run this utility to assist in
analyzing the system. This information allows the service provider to
reproduce the same environment on another computer for testing.
IMPORTANT: You should run Test Computer and have the printed report available
before placing a call to the Compaq Customer Support Center or your local Compaq
Service Provider.
Running Test
To run Test, complete the following steps:
1. Reboot the server by pressing the Ctrl+Alt+Delete keys.
2. Press the appropriate key
when the following prompt appears at the top
of the screen during POST.
Press "F 9" key for ROM-Based Diagnostics
Press "F10" key for System Partition Utilities
IMPORTANT: The text appears for only two seconds. If you do not press either
F9 or F10 during this time, you must reboot the server.
3. Select the Diagnostics and Utilities option.
4. Select Test Computer.
5. Select View Device List.
