. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-2 Using the Internal CD-ROM Drive
Writer: Project: Using the Internal CD-ROM Drive Comments:
File Name: R-appa.doc Last Saved On: 4/22/97 1:17 PM
Opening the Tray Automatically
You can open and close the Internal CD-ROM tray by using the automatic
eject button. Ensure plenty of clearance for the tray to open and close. Follow
the instructions below:
1. With your computer turned on, open the Internal CD-ROM tray by
pressing the eject button on the front panel of the drive.
2. Place the Internal CD-ROM disc in the tray, handling the Internal
CD-ROM disc from the edges, not the flat surfaces of the disc.
Figure A-2. Opening the Internal CD-ROM tray
3. Close the tray by again pressing the eject button.
The drive performs a diagnostic check and automatically begins reading the
table of contents. The busy indicator turns amber while the drive reads the
table of contents.
The tray automatically opens if the disc is upside-down, not properly nested in
the tray, or if any other condition prevents the drive from reading the disc.
4. When the busy indicator turns green, the drive is ready to receive
commands and data may be retrieved from the disc.
