. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-1
Compaq ProLiant 5000 Servers Reference Guide
Writer: Project: Power Cord Set Requirements Comments:
File Name: S-appb.doc Last Saved On: 4/22/97 1:19 PM
Appendix B
Power Cord Set Requirements
The automatic line sensing input feature of your ProLiant System permits it to
operate from any line voltage from 100 to 240 volts AC.
Power cord sets must meet the requirements of the country where you use the
server. The power cord set (appliance coupler, flexible cord, and wall plug)
you received with your server meets the requirements for use in the country
where you purchased your equipment. For more information on power cord
set requirements, contact your Authorized Compaq Dealer.
General Requirements
The requirements listed below are applicable to all countries:
1. The length of the power cord set must be at least 6 feet (1.8 meters)
and a maximum of 11.8 feet (3.0 meters).
2. All power cord sets must be approved by an acceptable accredited
agency responsible for evaluation in the country where the power cord
set will be used.
3. The power cord set must have a minimum current capacity and
nominal voltage rating of 13A, 125 volts AC or 10A, 250 volts AC, as
required by each country’s power system.
4. The appliance coupler must meet the mechanical configuration of an
EN 60 320/IEC 320 Standard Sheet C13 connector, for mating with
appliance inlet on the Server.
