ID-Mobile Global Guide
261
1. Create
PLC User Curves
on sheet
User Curves
.
2. Add
PLC Curves
into the block configuration using red "
+
" symbol, up to 10 curves
can be added.
3. Set
Z-axis
parameter for every added
PLC Curve
.
4. Rename the
Output
.
5. Adjust
Resolution
(number of decimal positions) of the output.
6. Adjust
Dimension
of the output.
Note:
The inputs are assigned to their sources in the sheet by
dragging a wire
from the
input to the source.
IMPORTANT: PLC User Curves and Z-axis parameters are defined by whole
numbers without decimal point. If there is connected analog value with a
decimal resolution to X or Z input then the analog value will be interpretted in
wrong way - the 3D Map block "does not see" the decimal resolution. Example:
input value 1,56 would be interpretted as value 156.
