Digital fire detection control panel
LYON REMOTE PLUS
79
FIRE PROTECTION MANUFACTURER
C / Compositor Wagner, 8 –P.I. Can Jardí 08191 - RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 –
CONTACTID
TEST INTERVAL
:
Checking time of the communication with the receiving center.
SITUATION MESSAGE PROGRAMING
Message sent to the phones configured in the previous options
SET CONTROL PANEL NUMBER:
SET CONTROL PANEL NUMBER.
CONTROL PANEL NUMBER:
VIEW THE CONTROL PANEL NUMBER.
TYPE OF PC COMMUNICATION:
The communication ports of the control panel are configurable with the different available functionalities. The
control panel has 3 RS485 communications ports identified as CONPC (COM1), CONRED (COM2), CONREP
(COM3) and a USB port identified as USB (USB1). In this menu you can select the port you want to use with the
following features:
NeTW:
Connection port for connecting control panels in network.
RePT: Connection port for connecting repeater.
iLNK: Connection port for control panel software configuration I-Link or I-Link ONLINE.
C_ID: Connection port for ContactID.
MoDB: Connection port for MODBUS.
ReMT: Connection port for REMOTE card.
C o m m u n i c a t i o n m o d e
N e T W :
C O M 2
R e P T :
C O M 3
i L N K :
U S B 1
C _ I D :
-
-
M o D B :
-
-
R e M T :
C O M 1
E N T E R :
S A V E ,
O P T I O N S :
U P - D OW N ,
E S C :
O U T
INTERNAL NETWORK:
AUTODETECT CONTROLLERS: In this menu, all the connected controllers are detected
and configured. This function deletes the previously configured controllers.
ERASE LOOP CONTROLLER: Erase the selected loop controller from the configuration
of the control panel.
ERASE SUPPLY CONTROLLER: To erase the selected power supply controller from the
configuration of the control panel.
CONSULT VERSION: Check the software versions for the CPU circuit (control panel
version) and for the different loop controllers (controller version) which may be connected.
