Digital fire detection control panel
LYON REMOTE PLUS
62
FIRE PROTECTION MANUFACTURER
C / Compositor Wagner, 8 –P.I. Can Jardí 08191 - RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 –
3.2.1.2. Incident and anomaly display.
Incidents and anomalies appear on the screen following this order of priority:
Alarms
Relays on
Faults
Disabled zones and points
Test Mode Events
Alarms
If an alarm takes place, the control panel will illuminate the red ALARM LED, sound the buzzer and show
the following screen.
In order to be able to select from amongst the different alarms, we must move using the up and down
cursors. The first line of the alarm corresponds to the selected alarm, whereas the second field refers to the
last alarm received.
A L A R M S
T Y P E :
0 1 > L A B E L
M C P T
0 1
∕ 0 1
If the right cursor is pressed we will be able to see the rest of the alarm information.
Unit Loop POINT
A L A R M S
C :
B :
P t :
0 1 > Z : 0 0 1
L A B E L
0 1
0 1
0 0 6
< < 0 1
∕ 0 2
Nº of alarmed zone
Selected alarm Nº alarms
Relays on
If the control panel acyivates a relay, a orange LED labeled RELAYS ON LED, sound the buzzer and
show the following message:
T R I G G E R
R E L A Y :
0 1 > L A B E L
A L A R M
R E L A Y
0 2
L A B E L
0 0 6
> > 0 1
∕ 0 2
If the right cursor is pressed we will be able to see the rest of the activation information.
Unit Loop POINT
T R I G G E R
C :
B :
P t :
0 1 > L A B E L
- -
- -
- - -
0 2
L A B E L
0 1
0 1
0 0 6
> > 0 1
∕ 0 2
