Digital fire detection control panel
LYON REMOTE PLUS
49
FIRE PROTECTION MANUFACTURER
C / Compositor Wagner, 8 –P.I. Can Jardí 08191 - RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 –
2.3.- Components.
2.3.1.- Batteries.
The supervised battery input/output allows the connection of batteries to the control panel. The batteries are
charged and monitorized through this connection .
The battery charge is compensated depending on the temperature of the batteries. This input/output is
protected by a fuse and also against inversion of polarity. In addition to this fuse there is the battery charger
fuse.
The capacity of the batteries that are incorporated into the control panel will depend on the number of loops
and additional loads (e.g. relays modules),
7Ah
being the
minimum
recommended. Batteries with a
capacity of 15Ah or 24Ah will have to be housed in a box external to the control panel,
ref C-55.
Connection of the two 12V batteries in series is exactly as indicated in
figure 23.
Power supply
Figure 23
. Battery connection schematic
2.3.2.- Connection schematic of a typical loop.
Connection of the
Lyon addressable system
will be carried out with
2 x 0.7 mm up to 2 x 2.5 mm
BRAIDED CABLE SCREENED HALOGEN FREE,
both the loops as well as the sounders, KMAY
connected elements, fault outputs and 30 volt auxiliary supplies.
The connection of the loop allows elements installed in the loop or in branches with wiring distances
between the elements and the control panel of lengths of up to 1500 meters.
NOTE: For specific details of how each element is to be connected, please see the relevant chapter.
12V
12V
-
- +
- +
BATERIA
-
+
+
+
30V
30V
-
-
AVERIA
S3
-
+
S2
ALARMA
NC
C
NA
S1
SIRENA
+
-
Fuente alimentacion
