Cofem Lyon Remote Plus Скачать руководство пользователя страница 76

Страница: 76 / 100

Digital fire detection control panel

LYON REMOTE PLUS

FIRE PROTECTION MANUFACTURER

C / Compositor Wagner, 8 –P.I. Can Jardí 08191 - RUBÍ (Barcelona) ESPAÑA.

Tlf.: +34 935 862 690 –

[email protected]

–

www.cofem.com

3.2.3.3.7- Added Delay Setup.................................................................................................Menu_9

This option is activated when it is introduced a time between 1" to 9 min 59".

When the

first

signal alarm is received, control panel actives corresponding programmed

delays

If operator press "

Silence Buzzer

" before programmed delay time is finished, all the relays (including the

sounder relay output in control panel) are additionally delayed with the value "

Additional delay

". In this

way, operator is allowed to investigate alarm.

If at any time during the delays a

second alarm

occurs (without the need to press the stop buzzer) in the

control panel, all the relays associated with the elements of alarm are

triggered immediately

3.2.3.3.8- Fast Trigger Zone...................................................................................................Menu_9

The alarm signal input of any element defined in the zone introduced in this option makes immediately
activation of all control panel relays.

3.2.3.3.9- Send Zones to Repeaters........................................................................................Menu_9

This option allows sending the configured zones to the repeaters, if not executed the repeaters will only
indicate the label of the point.

3.2.3.4- Update date and time .............................................................................................Menu_10

Within this menu we have two options, CHANGE DATE and CHANGE TIME. With the cursors we will
be able to update the fields for both options.

3.2.3.5.- Day/ Night timetable............................................................ .................................Menu_11

The day/night mode serves to configure the activations of relays since they can have a different operation
for day and night. The day mode can be activated or deactivated independently for the different days of the
week.



DAY TIME START: The control panel will request the start time for the day mode.



DAY TIME END: The control panel will request the end time for the day mode.



PROG. NIGHT MODE DAYS: This option allows us to configure the control panel night
mode for the whole 24 hours of a day.



DELETE NIGHT MODE PROG.: This option deletes the configuration described in the
previous paragraph



PROGRAMMING SUMMARY: This option shows us the configuration of the night mode

Содержание Lyon Remote Plus





































































































Результаты поиска

Содержание Lyon Remote Plus

Отзывы:

Похожие инструкции для Lyon Remote Plus

Бренды по названию

Популярные бренды

Cofem Lyon Remote Plus, Руководство пользователя

Результаты поиска

Содержание Lyon Remote Plus

Отзывы:

Похожие инструкции для Lyon Remote Plus

Бренды по названию

Популярные бренды