COBHAM Sea Tel Tracker 6000, Руководство по установке

Страница: 28 / 53

Sea Tel Tracker 6000 Installation
3.5. Assembling the Reflector
3‐12
EAR Controlled - ECCN EAR99
1. Open the Reflector Hub and Feed crate.
2. Place the hub on raised platform (or crate) where the Reflector & feed can be
assembled.
NOTE : Shimming of feed to reflector hub
may be needed. If so, shims will be
provided and thickness(es) will be noted on
reflector hub itself as shown.
32. There is a burnished 6mm
threaded hole in the top side of the
bottom plate of the middle post
section.
33. There is another burnished 6mm
threaded hole in the under side of
the top plate of the Base Stand
post section.
34. Apply Loctite to threads of 2 6mm
bolts. Use the bolts & washers to
install a ground strap around the
mating of these to plates.
35. Tighten the bolts torque spec.