COBHAM Sea Tel Tracker 6000, Руководство по установке

Страница: 37 / 53

Setup & Testing Sea Tel Tracker 6000
4. Setup & Testing
To setup IP addresses, adjust, align or test the antenna and all of the equipment mounted on it, please refer
to document 99-169239-A Procedure, Test, Product, Tracker 6000 Site Test at the end of the drawings
section of this manual.
The scope of this test procedure is use to validate the Tracker 6000 antenna system after the system has
been built and integrated at the installation site. It is not intended to be a step-by-step instruction to guide
the individual on how to connect, setup, and test the product. The Technician or Engineer using this
procedure to validate the antenna should have knowledge of the antenna system, basic PC communication,
and use of test equipment.
There are some specific Aps/programs required to accomplish this procedure. They will be provided on the
USB with all of the other documentation.
The IMA GUI (through the ICU mounted on the antenna) is only used for commissioning and troubleshooting
and it is required to be disabled for normal operation .
The SNMP GUI may be used as another way to control and check status of the antenna;
4‐1
EAR Controlled - ECCN EAR99