COBHAM Sea Tel Tracker 6000, Руководство по установке

Страница: 45 / 53

Tracker 6000 Technical Specifications Sea Tel Tracker 6000
7. Tracker 6000 Technical Specifications
The technical specifications for your Series Above Decks Equipment subsystems are listed below: Refer to
your ACU manual for its’ Specifications.
7.1.
Out Door Unit (ODU)
System Weight (ADE)
Weight 2732.2 kg (6023.8 lbs) with 8 m Radome
Stabilized Antenna Pedestal Assembly
Type Three-axis (Level, Cross Level and Azimuth)
Pointing Torque Mode Servo
Azimuth, Level, Cross Level Motors Size 34 FOV Controlled Step motors operating in
Torque Mode
Inertial Reference 3 Axsis Solid State Rate Sensors
Gravity Reference 3 Axzis Solid State Accelerometers
AZ transducer 16 Bit Absolute Encoder
Pointing Accuracy (Open Loop) 0.5 degrees
Pointing Accuracy (Closed Loop) 0.05 degrees (0.02 degrees Typ)
Pedestal Range of Motion:
Elevation Joint Angle 0 to + 180 degrees
Cross Level +/- 15 degrees
Azimuth 700 Degrees (+/- 270 nominal
Elevation Pointing 5 to + 175 degrees
Tracking modes Dishscan (Autotrack), Program Track (TLE, ECEF)
Antenna Reflector
Type Prime Focus, Parabola (1 Hub & 8 Petals)
Diameter 6 M (146 in)
Frequency TX 5.091 - 5.24912 GHz
Frequency RX 6.875-7.055 GHz
Size 6 m (19.685 ft)
Gain TX 47.3 dB
Gain RX 49.4 dB
Pattern Mask FCC 25.209
Mask start point 1.5 degrees
Axial 25 degrees
G/T C- band 12 dBk / 24 dBk
7‐1
EAR Controlled - ECCN EAR99