COBHAM Sea Tel Tracker 6000, Руководство по установке

Страница: 35 / 53

Installation Sea Tel Tracker 6000
3.11. Installing Interior Lighting
Refer to drawings:
92-162776-A1_DMG_RE_M SYSTEM BLOCK DIAGRAM, GLOBALSTAR TRACKER
93-164211-A01 SCHEMATIC, TRACKER 6000 SYSTEM, GLOBALSTAR
62-165842 RADOME LIGHTING KIT, T6000
1. Mount the Light Switch to radome near the radome hatch/door.
2. Route input power to the switch from the AC Power Strip.
3. Route power from the switch to the Power Supply.
4. Provide cover over the power cables to protect them and assure that they are not a trip
hazard.
5. Mount Power Supply in a convenient location based on the length of the interconnecting
cable from the Switch.
6. Mount the splitter in a convenient location based on the locations of the Power Supply and
interconnecting cable.
7. Install the 6 interior lights on inner flanges of the radome, as desired, based on the location
of the Splitter and the interconnecting cables.
8. Mount each light fixture to the inner flange.
9. Use cable ties to route and affix all of the interconnecting cables in place along the flanges.
3.12. Remove the Service Brackets
CAUTION; Do NOT remove the Service Brackets until all assembly work has been completed and you are ready to
check mechanical rotation of the antenna or turn antenna power ON.
DANGER: Severe damage to the antenna or the assembly personnel can be caused by removing the Service
Brackets until all work has been completed.
CAUTION; Do NOT turn antenna power ON until the Service Brackets have been removed.
3‐19
EAR Controlled - ECCN EAR99