COBHAM Sea Tel Tracker 6000, Руководство по установке

Страница: 47 / 53

Tracker 6000 Technical Specifications Sea Tel Tracker 6000
Output Noise Power Density
TX Band < -74 dBm/Hz
RX (6800-7100 MHz) < -125 dBm/Hz
SSB Phase IBUC R
100 Hz -60 dBc/Hz
1 kHz -70 dBc/Hz
10 kHz -85 dBc/Hz
100 kHz -105 dBc/Hz
1 MHz -120 dBc/Hz
External Reference
Reference Frequency Level -12 to +5 dBm
Reference Frequency
10 MHz external (multiplexed on TX IFL). Internal 10
MHz optional
PLL Acquisition Range: 9,999,980-10,000,020 Hz
Local Oscillator Frequency
Non-inverting (Band 6) 4250 MHz
IBUC Power Supply 200 to 240 VAC
Power Consumption (300W), 2000 VA
Monitor and Control
Ethernet (HTTP, Telnet, SNMP), via RJ45 connector,
RS232/485, Hand-held Terminal via MS-type
connector, FSK multiplexed on TX
Environmental
Operating temperature -40°C to +55°C
Relative humidity 100% condensing
Altitude 10,000 ft (3,000 m) ASL
LNB C-Band (RX)
RF Frequency: 6.875-7.055 GHz
LO Frequency: 9.160 GHz
IF Frequency: L-Band RX Ouput
Reference: external 10 MHz reference
Gain 60 dB Min.
Gain flatness: ±0.5 dB
Gain stability: 0.5 dB at stable temperature
Noise Figure: 0.8 dB Max. Target 0.7 dB.
Input Connector: WR112 UG
VSWR input: 1.5:1 max. Target 1.3:1
RF input: 0 dBm (Survivable)
Image rejection etc.: 50 dB min.
1 dB Compression point +10 dBm
Output IP3 +20 dBm
Output connector: N female (50 ohm)
Power: +12 to +24VDC
7‐3
EAR Controlled - ECCN EAR99