COBHAM Sea Tel Tracker 6000, Руководство по установке

Страница: 36 / 53

Sea Tel Tracker 6000 Installation
Refer to drawing 62‐167134 BRACKET KIT, SERVICE, T6000.
1. Assure that all personnel in the
area are aware that the Service
Brackets are being removed.
2. Remove the mounting hardware
from the Service Brackets while
maintaining control of the
mechanism.
3. Store the Service Brackets, and the
mounting hardware, in a secure
location where they can be used
again whenever the antenna is
being stowed (immobilized).
4. Assure that the ODU/Antenna is ready to be energized.
5. If power to the ODU was “tagged out”, remove the tag from the breaker that
supplies power to the ODU.
6. If power to the Antenna from the Circuit Breaker Box was “tagged out”, remove
the tag from the breaker that supplies power to the Antenna.
7. When all nearby personnel are ready, turn power breaker ON.
8. Start, or return to, normal service.
3.13. Final Checks
Remove all tools, parts and installation debris from inside the radome.
Remove all tools, parts and installation debris from the area around the outside of the radome.
3‐20
EAR Controlled - ECCN EAR99