Service
98-175666-C
Chapter 4: Setup of the antenna
4-38
4. Type the user name
admin
(default) and the password
iDirect
(default).
5. In the menu
Commissioning
click
One Touch Commissioning
.
6. Click
Start
. One Touch Commissioning takes place. When commissioning is
completed the antenna will search for the I5 satellite with the highest elevation.
7. The antenna will find the satellite and the modem will perform the necessary steps
to enter the network (software upgrades, if available).
8. The web interface of the iDirect core module will indicate the modem in the
network and the modem status is shown in the display in the menu
MODEM
of the
SAILOR XTR GX-R2 web interface.
9. When commissioning is completed, test all subscribed services.
10. Exit the iDirect web interface.
4.3.4 Modem access configuration (port forwarding)
For ease-of-use, you can access the modem (e.g. modem web interface) through the
BDU using port forwarding. To make the modem accessible via the BDU, do as follows:
1. In the BDU web interface, select
Service
>
Modem
.
2. Select one of the following methods to access the modem.
• HTTP tunnel to modem (port 8080)
• HTTPS tunnel to modem (port 8443)
• SSH tunnel to modem (port 8022)
• Optional tunnel target IP address (blank to disable)
3. Click
Apply
.
Example:
To access the web interface of your modem using HTTPS, select
HTTPS
tunnel to modem (port 8443)
and click
Apply
.
Then, in the address bar of your browser, enter:
https://<BDU IP address or hostname>:8443
You should now see the web interface of the modem.
Figure 4-26: Unified web interface of the Core Module
Note
For Ku terminals, you must always enter the modem IP address here, it
cannot be left blank.
