COBHAM SAILOR XTR GX-R2 Скачать руководство пользователя страница 42

Страница: 42 / 176

Installation of the ADU (S600 antenna)

98-175666-C

Chapter 2: Installation

2-21

2.4 Installation of the ADU (S600 antenna)

The ADU is shipped fully assembled. You have to install it on the mast and attach the

ADU cable.

The antenna comes with a lifting harness already fitted. The lifting harness is provided

solely for the purpose of installation of the antenna. The belt of fibre material prevents

the antenna from toppling during the lifting process.

The lifting harness (Cobham SATCOM part number TT 48-149056) is designed, tested

and conforms to the requirements for lifting equipment in DIRECTIVE 2006/42/EC OF

THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on machinery, and

amending Directive 95/16/EC (recast). The Working Load Limit (WLL) is defined as

40 kg.

WARNING!

Use the already mounted lifting harness to lift the ADU

without damaging the radome.

WARNING!

The ADU may be subject to swaying motions in windy

conditions. Always use tag lines to stabilise the ADU

during hoisting. It is the crane operatorʼs responsibility to

determine whether the environmental conditions are

suitable for a safe lift.

Figure 2-22: Use of the lifting harness and tag lines for safe hoisting

WARNING!

Use the lifting harness only to lift the antenna. Do not lift

other objects or persons with the harness.

Tag lines

Содержание SAILOR XTR GX-R2

















































































































































































Результаты поиска

Содержание SAILOR XTR GX-R2

Отзывы:

Похожие инструкции для SAILOR XTR GX-R2

Бренды по названию

Популярные бренды

COBHAM SAILOR XTR GX-R2, Руководство по установке

Результаты поиска

Содержание SAILOR XTR GX-R2

Отзывы:

Похожие инструкции для SAILOR XTR GX-R2

Бренды по названию

Популярные бренды