98-175666-C
Appendix F: Event messages
F-7
List of events
08841-0 ADM
ERROR
Tuner lock
The internal tuner PLL was unable to lock.
(!V,!T)
08842-0 ADM
WARNING GSC demodulator
The GSC demodulator has reported an error.
(!V,!T)
08843-0 ADM
WARNING DVBS demodulator The DVBS demodulator cannot be initialised
and loaded correctly. (!V,!T)
08844-0 ADM
WARNING BUC voltage out of
range
The BUC voltage is out of range. (!V,!T)
08845-0 ADM
WARNING LNB voltage out of
range
The LNB voltage is out of range. The LNB might
be switched off to protect the power supply
circuitry. Reactivate satellite profile to try again,
check LNB cable and surroundings if the
problem persists. (!V,!T)
08846-0 ADM
WARNING AIM-O supply
voltage out of
range
Supply voltage measured at AIM-O is not within
expected range (!V,!T)
08847-0 ADM
WARNING AIM-O Master PLL
lock
The AIMO master PLL has lost lock. Check the
input reference signal. (!T)
08848-0 ADM
WARNING TX Calibration
missing
Tx calibration not performed. (!T)
08880-0 ADM
WARNING WLAN configuration
error
Configuration of WLAN module failed. (!V,!T)
08881-0 ADM
WARNING DHCP Client
address
An IP address was received from an external
DHCP server that overlaps another VLAN. Traffic
on these VLANs may be unpredictable.
Reconfigure the server or IP settings of that
VLAN.
08A00-0 ADM
WARNING GX Core Module fan There is a problem with the Core Module fan.
Check/clean and replace if necessary. (!V,!T)
08A01-0 ADM
WARNING GX Core Module
heater
There is a problem with the Core Module heater.
Check and replace if necessary. (!V,!T)
08A02-0 ADM
WARNING GX Core Module
temperature
The Core Module temperature is out of range.
This may affect performance, and the Core
Module will be shut down if the situation gets
worse. If the "GX core module heating" event is
also present, the internal heater is currently
warming up the unit to its operational
temperature. (!V,!T)
ID
Module Type
Description
Explanation
Table F-1: Event messages (Continued)
