Clear-Com Eclipse HX series, Руководство пользователя

Страница: 197 / 230

Eclipse | Upgrade Guide
Page 197
To upgrade FreeSpeak II beltpack or antenna application code using EHX:
1. Ensure that you have the following equipment:
Required equipment Description / comments
PC with an Ethernet or
serial communications
port -
EHX software EHX must be installed and configured.
EHX configuration file /
map -
Ethernet or serial cable
for the PC-to-matrix
connection -
Appropriate *.fww format
application
The appropriate *.fww format beltpack and
antenna code is available from the software
USB
Table 45: Required equipment
2. Start EHX on the PC.
3. Connect the PC to the matrix using either Ethernet or serial communications port.
4. Open the EHX configuration map within EHX.
5. Select System > Layout.
6. Right click the matrix and then select Firmware> Update Firmware .
7. The update firmware wizard dialogue is displayed. Click Next and ensure that the
Wireless radio button is selected. The Wireless radio button will only be available
if you have an E-Que FSII-TA Antenna or E-Que FSII-TA Splitter card configured
in your matrix configuration.