Clear-Com Eclipse HX series, Руководство пользователя

Страница: 190 / 230

Eclipse | Upgrade Guide
Page 190
2. Fit the AES-6 card to either the IMF-3 interface frame or Eclipse HX-Median Matrix . If
there is a jumper on J6, move the jumper to J3.Reset or power-cycle the card so
the jumper change takes effect.
3. Connect the serial cable to the front of the AES-6.
4. Run Flash Development Toolkit BASIC (FDT). Configure the FDT ( Options > New
Settings ) as follows:
FDT field Setting
Select Device H8S/2318F
Select Port COM1 (change to match COM port present on the PC)
CPU Frequency 25.0000 MHz
Connection BOOT mode
Recommended Speed Deselect Use Default and set to 9600
Protection Automatic
Messaging Advanced
User data Selected (Checked)
Table 16-2: FDT settings
5. Navigate to the AES-6 application code ( *.mot format file) on the software USB:
Drivers USB > ECLIPSE DRIVERS > Other_Software > xxxxxx - AES-6
Application
Where xxxxxx represents the product number).
6. Select Program Flash and download the AES-6 application code ( *.mot format
file).
7. When the download is complete, move the jumper on J3 back to J6. Reset or
power-cycle the card.
Note:
If an FPGA image is present, the card will now run normally. If an FPGA image is
not present, you will be prompted for an FPGA image. See 3.33.1 Upgrading
AES-6 FPGA.
16.1 Upgrading AES-6 FPGA
Before attempting any upgrade of the AES-6 card, ensure that anti static precautions are
taken, as the Eclipse items are sensitive to static discharges.