Clear-Com Eclipse HX series, Руководство пользователя

Страница: 114 / 230

Eclipse | Upgrade Guide
Page 114
In this example procedure, the first device will be bypassed and an FPGA image
will be assigned to the second device.
•
For the first device, press Bypass .
•
For the second device, select the FPGA image ( *.mcs format). The FPGA file is
available from the Drivers USB and is dependent on whether the MVX Card is a Mark
I or a Mark II :
•
MVX MK I (Green PCB)
Drivers USB > ECLIPSE DRIVERS > Omega-Median-Delta >
xxxxxx
– MVX MK I (Green PCB) FPGA
(Where xxxxxx represents the product number) .
•
MVX MK II (Blue PCB)
Drivers USB > ECLIPSE DRIVERS > Omega-Median-Delta >
xxxxxx
– MVX MK II (Blue PCB) FPGA
(Where xxxxxx represents the product number) .
Figure 7-6: Example Xilinx device programming properties
9. Right click the second device and select Programming .
The upgrade starts, and takes approximately 2 minutes to complete. When the
upgrade is complete, the
Program Succeeded message is displayed in the main
window.
A summary dialog is presented. For
all devices, ensure that the Erase Before
Programming and Verify flags are set. Click OK .
10. Power down the MVX-A16 card.
7.4.2 Upgrading the MVX-A16 MK2
1. Ensure that version 13.1 of the Xilinx programming tools has been installed.
Tip: For more information about installing the Xilinx programming tools, see
Appendix J:Xilinx tools.