Citrix ByteMobile T1010, Установка, настройка и администрирование

Страница: 46 / 172

2-6 T-Series Traffic Director Installation, Configuration and Administration Guide
Chapter 2 Installing the T1000
Items Provided by Customer
In addition to the items included in the box with your new T1000, you will need the
following items to complete the installation and initial configuration process.
• Network cables and SFP transceiver modules for each port you will connect to your
network.
• One available network port on your network switch or hub for each T1000 network
port you want to connect.
Note: Transceiver modules are sold separately. Refer to the Product Specifications and
the Citrix NetScaler documentation for a build-specific list of supported
transceivers and cable types.
Contact your Bytemobile sales representative to order transceiver modules for
your T1000.
• A computer to serve as a management workstation
Handling Static-Sensitive Devices
Attention: Static electricity can damage electronic devices. To avoid damage, keep
static-sensitive devices in their static-protective packages until you are ready to
install them.
ESD is the release of stored static electricity that can damage electronic circuits. Static
electricity is often stored in your body and discharged when you come in contact with an
object with a different potential. An ESD wrist strap safely channels the electricity from
your body to a proper ground (such as the T1000 unit).
Use an ESD wrist strap whenever you are working on the T1000 unit, especially when you
handle modules other devices. To work properly, the wrist strap must have good contact at
both ends (touching your skin at one end and connected to the ESD connector on the front or
back of the T1000 unit). To reduce the possibility of electrostatic discharge, observe the
following precautions:
• Limit your movement. Movement can cause static electricity to build up around you.
• Handle the device carefully, holding it by its edges or its frame.
• Do not touch solder joints, pins, or exposed circuitry.
• Do not leave the device where others can handle and damage it.
• While the device is still in its static-protective package, touch it to an unpainted
metal part of the T1000 unit for at least 2 seconds. This drains static electricity from
the package and from your body.