Citrix ByteMobile T1010, Установка, настройка и администрирование

Страница: 102 / 172

3-28 T-Series Traffic Director Installation, Configuration and Administration Guide
Chapter 3 Basic T1000/Unison Load-Balancing Configuration
Once the T1000 is appropriately configured one is strongly advised to configure Access
Control Lists (ACLs) to prevent access to it from the all data plane traffic VLANs before
enabling it to service live traffic. The following command snippet applies to the example
management IP subnet of section
“Setting Management IP Address” on page 3-8 and the
VLANs of reference deployment in Figure 3-2:
> add ns acl block_mgmt_ip_range_I DENY -destIP=10.8.130.1-10.8.130.254 -vlan 151
-priority 155
Done
> add ns acl block_mgmt_ip_range_II DENY -destIP=10.8.130.1-10.8.130.254 -vlan 251
-priority 156
Done
> add ns acl block_mgmt_ip_range_III DENY -destIP=10.8.130.1-10.8.130.254 -vlan
100 -priority 157
Done
> add ns acl block_mgmt_ip_range_IV DENY -destIP=10.8.130.1-10.8.130.254 -vlan 200
-priority 158
Done
> apply ns acls
Done