Citrix ByteMobile T1010, Установка, настройка и администрирование

Страница: 121 / 172

T-Series Traffic Director Installation, Configuration and Administration Guide 5-9
Authentication and Authorization
4. Using SCP or FTP or any third-party program, copy the new license file(s) to the
directory
/nsconfig/license . Example:
login: nsroot
Password: nsroot
Last login: Mon Aug 4 03:37:27 2008 from 10.102.29.9
Done
> shell
Last login: Mon Aug 4 03:51:42 from 10.103.25.64
root@ns# mkdir /nsconfig/license
root@ns# cd /nsconfig/license
5. Copy the license to this directory.
Authentication and Authorization
To configure T1000 authentication and authorization, you must first define the users who
have access to the T1000, and then you can organize these users into groups. After
configuring users and groups, you need to configure command policies to define types of
access, and assign the policies to users and/or groups.
You must log on as an administrator to configure users, groups, and command policies. The
default administrator user name is nsroot. After logging on as the default administrator, you
should change the password for the nsroot account. Once you have changed the password,
no user can access the T1000 until you create an account for that user. If you forget the
administrator password after changing it from the default, you can reset it to nsroot.
Configuring Users and Groups
You must define your users by configuring accounts for them. To simplify the management
of user accounts, you can organize them into groups.
You can also customize the T1000 command-line prompt for a user. Prompts can be defined
in a user’s configuration, in a user-group configuration, and in the global configuration. The
prompt displayed for a given user is determined by the following order of precedence:
1. Display the prompt as defined in the user's configuration.
2. Display the prompt as defined in the group configuration for the user’s group.
3. Display the prompt as defined in the system global configuration.
Configuring User Accounts
To configure user accounts, you simply specify user names and passwords. You can change
passwords and remove user accounts at any time.
At the T1000 command prompt, use the following commands to create a user account and
verify the configuration:
• add system user userName [ -promptString string ]
• show system user