Citrix ByteMobile T1010, Установка, настройка и администрирование

Страница: 125 / 172

T-Series Traffic Director Installation, Configuration and Administration Guide 5-13
Authentication and Authorization
For example:
> bind system user user1 -policyName read_all 1
Done
> sh system user user1
User name: user1
Command Policy: read_all Priority:1
Done
To unbind command policies from a user:
At the T1000 command prompt, type the following commands to unbind a command policy
from a user and verify the configuration:
• unbind system user userName -policyName policyName
• show system user userName
To bind command policies to a group:
At the T1000 command prompt, type the following commands to bind a command policy to
a user group and verify the configuration:
• bind system group groupName -policyName policyName priority
• show system group groupName
For example:
> bind system group Managers -policyName read_all 1
Done
> sh system group Managers
Group name: Managers
User name: johnd
Command policy: read_allPriority:1
Done
To unbind command policies from a group:
At the T1000 command prompt, enter the following commands to unbind a command policy
from a user group and verify the configuration:
• unbind system group groupName -policyName policyName
• sh system group groupName
Resetting the Default Administrator (nsroot) Password
The nsroot account provides complete access to all features of the T1000. Therefore, to
preserve security, the nsroot account should be used only when necessary, and only
individuals whose duties require full access should know the password for the nsroot
account. Frequently changing the nsroot password is advisable. If you lose the password,
you can reset it to the default and then change it.