Citrix ByteMobile T1010, Установка, настройка и администрирование

Страница: 37 / 172

T-Series Traffic Director Installation, Configuration and Administration Guide 1-17
Common Hardware Features
Management Ports
Management ports are standard copper Ethernet ports (RJ45) that are used for direct access
to the T1000 for system administration functions. These are type 10/100/1000BASE-T. This
port has a maximum transmission speed of 1 gigabit per second. To connect any of these
ports to your network, plug one end of a standard Ethernet cable into the port and plug the
other end into the appropriate network connector.
1 Gbps SFP Ports
The SFP ports are high-speed ports that can operate at speeds up to 1 Gbps. You need an
appropriate SFP transceiver to connect to these ports, allowing the use of either fiber or
copper cables.
Refer to the Product Specifications and the NetScaler documentation for a build-specific list
of supported transceivers and cable types.
10 Gbps SFP+ Ports
The SFP+ ports are high-speed ports that can operate at speeds of 10 Gbps. You need an
appropriate SFP+ transceiver to connect to these ports, allowing the use of either fiber or
copper cables. If the other end of the cable is attached to a 1GE SFP port, the 10GE SFP+
port automatically negotiates to match the speed of the 1GE SFP port.
Refer to the Product Specifications and the NetScaler documentation for a build-specific list
of supported transceivers and cable types.
Port Status Indicators
The port LEDs show whether the link is established and traffic is flowing through the port.
The following table describes the LED indicators for each port. There are two LED
indicators for each port type.