manualshive.com logo in svg

Citel EXTender PBXgateway, Руководство администратора

Поделиться
Скачать
Citel EXTender PBXgateway Скачать руководство пользователя страница 91

IP Dual Port PBXgateway and Remote System Administrator’s Guide 

91

12 F

ILE 

M

ANAGEMENT AND 

S

YSTEM 

U

PGRADES

 

Flash Files 

The PBXgateway and Remote contain a flash file system to store basic configuration files, 
the actual firmware and the instructions necessary for starting the units. The flash memory 
system retains stored data even with no external power applied.  

Access to the flash file system is gained using a PC (FTP or Telnet access via LAN). FTP 
must be enabled, if that is the method you are using, and an administrator’s password 
should be configured, to control access.  

Firmware images stored in the flash file system are saved with extension “.mab.” These 
files use binary format. 

Configuration files stored in the flash file system are saved with “.swt” extensions for the 
PBXgateway and “.rem” extensions for Remote. All changes you make to the 
configuration must be saved to the flash file to be applied. The MI prompts you to save 
changes when necessary. 

Call Back files stored in the flash file system are saved with the “.cbk” extension. They 
contain specific information for the PBXgateway and Remote boot process (IP 
addressing, active configuration file, firmware for boot). The PBXgateway saves “.cbk” 
files to allow it to contact remote users that are currently disconnected. This file is also 
used for Remote Login capabilities.  

 

Configuration File Management 

Changing the Active Configuration File 

When the PBXgateway or Remote is powered-up, the flash file system loads a 
configuration file – “.rem” (Remote) or “.swt” (PBXgateway) – which contains all 
parameters necessary for operation. You may change this “.rem” or “.swt” file so that a 
different set of parameters loads. 

The default configuration file shipped with the units is “runtime.rem” or “runtime.swt.” To 
change this go to Gateway (Remote) ->Utilities->Upgrade->Config File. Select an existing 
“.rem” (Remote) or “.swt” (Gateway) file from the list displayed. The display reads 
“Change Configuration file to …..”  Enter [Y]es or [N]o. Assuming you type “[Y]es” to 
change the configuration file, you are prompted to reboot. 

This change will not take effect without a reboot. All changes made to the PBXgateway or 
Remote parameters will be saved to the file you selected. 

Document Number: M-4100-MUC 

Version: Rev AA 

© Copyright 2007 Citel plc All Rights Reserved 

 

Содержание EXTender PBXgateway






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды