IP Dual Port PBXgateway and Remote System Administrator’s Guide
46
Advanced System Parameters – System Name/Connect Speed
The PBXgateway system configuration screen is shown below:
Path:
Gateway->Configuration->System
Figure 22: PBXgateway – System Name/Connect Speed Configuration Screen
1. Assigning
a
system
Name
– The Name field in the PBXgateway is used for
identification purposes only and appears next to the software revision (see above).
This makes it easier for an administrator when managing multiple sites. Typically the
geographic location of the unit is input “Seattle Office” for example. Any text up to 15
characters can be input in this field.
2. Changing
the
Console baud
– This is the speed at which information is transmitted to
and from the PBXgateway through the console port labeled “COMM” on the back of
the unit. The baud rate can be changed to 2400, 4800, 9600, 19200 or 38400. The
default is 9600.
Document Number: M-4100-MUC
Version: Rev AA
© Copyright 2007 Citel plc All Rights Reserved
