Configuring the Cisco TelePresence Management Server
Cisco TelePresence Management Suite Installation and Getting Started Guide
Page 36 of 70
2. Use the Up or Down arrow to select Commands and press Enter .
3. Use the Up or Down arrow to select Restart and press Enter.
4. At the Restart? prompt, use the Up or Down arrow to select Yes and press Enter.
To shutdown from the LCD panel
1. Press Enter to display the Main Menu.
2. Use the Up or Down arrow to select Commands and press Enter.
3. Use the Up or Down arrow to select Shutdown and press Enter.
4. At the Shutdown? prompt, use the Up or Down arrow to select Yes and press Enter.
Note: There is no specific feedback on the LCD panel that the shutdown process has completed. The
server can safely be powered off after a few minutes.
The system can also be reset and shutdown using Windows Remote Desktop or using the web
interface:
1. Start a web browser and enter the address https://<ManagementServerIPAddress>:8098
where <ManagementServerIPAddress> is the IP address of the Cisco TelePresence
Management Server.
2. If you see a security warning stating ‘There is a problem with this website's security certificate’ –
this is normal because your browser does not trust the default server certificate installed. Click
‘Continue to this website’ to acknowledge the warning and continue.
3. When prompted f, enter the administrator username and password.
4. Select the Maintenance tab. Click Shutdown then chose to shutdown or restart the server.
Cisco TelePresence Management Server software
installation/upgrades
The Cisco TelePresence Management Server is upgraded using the same Cisco TMS Application
software (and therefore the same steps) used in software-only installations of Cisco TMS. The Cisco
TMS installer automatically detects if the software is being run on a Cisco TelePresence Management
Server and acts accordingly.
To perform a Cisco TMS upgrade:
1. Using the Microsoft Remote Desktop Client, connect to the Cisco TelePresence Management
Server IP or hostname.
2. Login using the local administrator username and password.
3. Copy the Cisco TMS software installer s To the Cisco TelePresence Management Server using a
file share, web download, or the drive mapping feature of Remote Desktop Client.
4. Follow the process in the Installation and upgrade section, selecting the Complete installation.
Note: The SQL Server sa login information is needed during the upgrade. The SQL login defaults are
username: sa and password: TANDBERG.
Note: The Cisco TelePresence Management Server security policy is updated and maintained by the
Cisco TMS Installer. If an administrator makes changes to negate any of these security lockdown
steps, the security policy will be re-applied automatically when the Cisco TMS software installer next
runs
