manualshive.com logo in svg

Cisco SCE 8000 10GBE, Руководство по настройке программного обеспечения

Cisco SCE 8000 10GBE - это высокопроизводительный устройство для управления полосой пропускания. Для настройки программного обеспечения необходимо скачать Руководство по настройке программного обеспечения бесплатно с manualshive.com. Это руководство поможет вам настроить устройство для оптимальной производительности.

Поделиться
Скачать
background image

 

C-10

Cisco SCE 8000 10GBE Software Configuration Guide

OL-30621-02

Appendix C      Cisco SCE 8000 Licensing Information 

NetSNMP License

---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) -----

Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided 
that the following conditions are met:

  •

Redistributions of source code must retain the above copyright notice, this list of conditions and the 
following disclaimer.

  •

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and 
the following disclaimer in the documentation and/or other materials provided with the distribution.

  •

The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived 
from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS 
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY 
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGE.

---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) -----

Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. 
All rights reserved.

Use is subject to license terms below. 

This distribution may include materials developed by third parties.

Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun 
Microsystems, Inc. in the U.S. and other countries.

Redistribution and use in source and binary forms, with or without modification, are permitted provided 
that the following conditions are met:

  •

Redistributions of source code must retain the above copyright notice, this list of conditions and the 
following disclaimer.

  •

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and 
the following disclaimer in the documentation and/or other materials provided with the distribution.

  •

Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to 
endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS 
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 

Содержание SCE 8000 10GBE































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SCE 8000 10GBE

NEC Univerge SV8100 System Specifications preview
Univerge SV8100
Бренд: NEC Страницы: 2
SEH SEH650 Network Installation Manual preview
SEH650
Бренд: SEH Страницы: 5
KYLAND SICOM3005A Hardware Installation Manual preview
SICOM3005A
Бренд: KYLAND Страницы: 30
Supermicro SuperWorkstation 740A-T User Manual preview
SuperWorkstation 740A-T
Бренд: Supermicro Страницы: 138
AXIOMTEK NA-1301 Hardware Installation Manual preview
NA-1301
Бренд: AXIOMTEK Страницы: 55
Supermicro SUPERSERVER 5018D-FN8T User Manual preview
SUPERSERVER 5018D-FN8T
Бренд: Supermicro Страницы: 124
Ericsson HL950 Administrator'S Manual preview
HL950
Бренд: Ericsson Страницы: 159
IBM 8678 Installation And User Manual preview
8678
Бренд: IBM Страницы: 96
Epson C823781 Software Installation Manual preview
C823781
Бренд: Epson Страницы: 28
Epson EpsonNet 802.11b Product Support Bulletin preview
EpsonNet 802.11b
Бренд: Epson Страницы: 30
Epson Stylus C80WN - Ink Jet Printer Hardware preview
Stylus C80WN - Ink Jet Printer
Бренд: Epson Страницы: 1
Epson C823781 Administrator'S Manual preview
C823781
Бренд: Epson Страницы: 258
Epson C82378 Administrator'S Manual preview
C82378
Бренд: Epson Страницы: 280
Fujitsu PRIMERGY TX140 S2 Operating Manual preview
PRIMERGY TX140 S2
Бренд: Fujitsu Страницы: 86
Fujitsu PRIMERGY TX150 S3 Options Manual preview
PRIMERGY TX150 S3
Бренд: Fujitsu Страницы: 95
Fujitsu PRIMERGY TX150 S6 Options Manual preview
PRIMERGY TX150 S6
Бренд: Fujitsu Страницы: 118
Fujitsu primergy TX150 User Manual preview
primergy TX150
Бренд: Fujitsu Страницы: 305
Fujitsu PRIMERGY TX150 S6 Operating Manual preview
PRIMERGY TX150 S6
Бренд: Fujitsu Страницы: 127

Бренды по названию

Популярные бренды

Загрузить еще бренды