10-13
Cisco SCE 8000 10GBE Software Configuration Guide
OL-30621-02
Chapter 10 Managing Subscribers
Removing Subscribers and Templates
Removing Subscribers and Templates
•
How to Remove a Specific Subscriber, page 10-13
•
How to Remove All Introduced Subscribers, page 10-14
•
How to Remove a Specific Anonymous Subscriber Group, page 10-14
•
How to Remove All Anonymous Subscriber Groups, page 10-14
•
How to Remove All the Anonymous Subscribers, page 10-14
•
How to Remove All Subscriber Templates, page 10-15
•
How to Remove Subscribers by Device, page 10-15
Use the following commands to remove all subscribers, anonymous groups, or subscriber templates from
the system.
•
no subscriber all
•
no subscriber anonymous-group all
•
clear interface linecard subscriber anonymous
•
default subscriber template all
Use the following commands to remove a specific subscriber or anonymous group from the system.
•
no subscriber name
•
no subscriber anonymous-group name
These subscriber management commands are LineCard interface commands (with the exception of the
clear interface linecard subscriber anonymous
command, which is a Privileged Exec command).
Make sure that you are in LineCard Interface command mode, and that the SCE(config if)# prompt
appears in the command line.
How to Remove a Specific Subscriber
Options
The following option is available:
subscriber-name—
The name of the subscriber to be removed
From the SCE(config if)# prompt, type:
Command
Purpose
no subscriber name
subscriber-name
Removes the specified subscriber.
