manualshive.com logo in svg

Cisco SCE 8000 10GBE, Руководство по настройке программного обеспечения

Поделиться
Скачать
Cisco SCE 8000 10GBE Скачать руководство пользователя страница 470

 

C-4

Cisco SCE 8000 10GBE Software Configuration Guide

OL-30621-02

Appendix C      Cisco SCE 8000 Licensing Information 

OpenSSH License

5.

One component of the ssh source code is under a 3-clause BSD license, held by the University of 
California, since we pulled these parts from original Berkeley code.

     * Copyright (c) 1983, 1990, 1992, 1993, 1995

     *      The Regents of the University of California.  All rights reserved.

     *

     * Redistribution and use in source and binary forms, with or without

     * modification, are permitted provided that the following conditions

     * are met:

     * 1. Redistributions of source code must retain the above copyright

     *    notice, this list of conditions and the following disclaimer.

     * 2. Redistributions in binary form must reproduce the above copyright

     *    notice, this list of conditions and the following disclaimer in the

     *    documentation and/or other materials provided with the distribution.

     * 3. Neither the name of the University nor the names of its contributors

     *    may be used to endorse or promote products derived from this software

     *    without specific prior written permission.

     *

     * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND

     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE

     * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE

     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 

CONSEQUENTIAL

     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE 

GOODS

     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 

STRICT

     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

     * SUCH DAMAGE.

6.

Remaining components of the software are provided under a standard 2-term BSD licence with the 
following names as copyright holders:

  •

Markus Friedl

  •

Theo de Raadt

  •

Niels Provos

  •

Dug Song

  •

Aaron Campbell

Содержание SCE 8000 10GBE































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды